The Universal Foam Concrete production machine FC100W2 "Progress"
The Specification
The production capacity up to 20m3/hr
| Parameters | Measurement | Volume |
|---|---|---|
| Unloading from the mixer | air pressure | |
| Type of operation | cycle | |
| Useful volume of the mixer-Pneumatic | M3 | 1.0 |
| Operating pressure | atm. | 10 |
| Rated power of electric mixer | kW | 7.5 (11) |
| Control over the electric mixer | By the frequency inverter | |
| Voltage / frequency of the mains | Volts / Hertz | 380/50 |
Shaft speed mixing device at a constant torque |
R / min. | 0 - 75 |
Productivity an air compressor on the discharge side |
Liter / p. minute | 2х1000 |
Power of electric compressors (simultaneous or separate operation of compressors) |
kW | 2х11 |
| Power of electric water pump mixing | kW | 2.2 |
| Power electric pump for pre-foaming solution | kW | 2.2 |
| Productivity the foam generator | Liter / p. minute | 2х750 |
| Productivity of the complex, (averaged over the foam concrete D600) | m3 / hr | up to 20 |
| Foam concrete transferring ranges: | ||
| By horizontal distance | m | up to 200 |
| By high of the structure | m | up to 50 |
| The inner diameter of the pipeline (hose) | mm | 50/65/76 |
| Maximum power consumption | kW | 37 |
| Overall dimensions Length x Width x Height | m | 3.7 х 1.5 х 1.9 |
| Gross Weight of the equipment in a dry state, without pipeline | ton | 3.5 |
| Loading height of dry ingredients (working platform level) | m | 0.75 |
| Additive liquid components (water and foam) | automatic | |